Interior French doors in Conyers, GA typically run $600 to $3,000 installed, depending on size, material, and whether a rough opening already exists. These glass-paned pairs let light move between rooms while still giving you a door to close, something a barn door or open cutout can't do. Here's what drives that price, which sizes fit Conyers' mix of older and new-construction homes, and the one material mistake that causes the most callbacks in this climate.
What Interior French Doors Cost in Conyers, GA (2026)
| Door Type | Typical Installed Cost |
|---|---|
| Interior French doors | $600 – $3,000 |
| Exterior French doors | $1,300 – $5,500 |
Interior units cost less than exterior ones because they skip weatherstripping, insulated glass, and multi-point exterior locks entirely. A basic prehung interior pair can land as low as $300 to $600. Custom sizing, upgraded glass, or solid hardwood can push a single project past $3,000.
Labor rates around Conyers and the greater Atlanta metro generally sit in the $70 to $120 per hour range for an experienced installer, which lines up with regional pricing across most of Georgia's suburban counties.
What Actually Drives the Price
Size and Glazing
Standard widths cost less because they're stocked, not special-ordered. Custom glazing, frosted panels, decorative grilles, or oversized panes add cost on top of that base price.
Glass matters for more than looks. Building codes require safety-rated glazing in and around doors in most residential applications, and the federal standard governing that glass is spelled out in the Consumer Product Safety Commission's architectural glazing rule. Ask any installer to confirm the glass you're buying meets that standard before it goes in the opening.
Material
| Material | Typical Cost (Door Only) |
|---|---|
| Hollow-core / MDF | $200 – $500 |
| Vinyl | $300 – $800 |
| Steel | $500 – $1,500 |
| Aluminum | $600 – $1,500 |
| Fiberglass | $700 – $2,000 |
| Solid wood | $800 – $3,000+ |
Existing Opening vs. New Opening
| Scenario | Interior Door Total Cost |
|---|---|
| Like-for-like replacement (existing opening) | $600 – $1,500 |
| Existing opening, upgraded door or glass | $900 – $2,200 |
| New structural opening | $2,000 – $4,000+ |
Dropping a new pair into an opening that already exists is almost always the cheaper path. Cutting a new opening means framing, header work, drywall patching, and sometimes rerouting electrical, which adds both time and cost.
Labor: What You're Really Paying For
A straightforward swap into an existing opening generally takes two to five hours and runs $300 to $650 in labor. Complex jobs, like converting a closet opening into a double-door entry, can run $1,500 or more once framing and finish carpentry are factored in.
Our crews see this pattern constantly across Rockdale and Newton County homes: a tight, square, already-framed opening is a half-day job, while anything involving a load-bearing wall turns into a multi-day project fast. If you're not sure which category your project falls into, a quick site visit settles it before you commit to a budget.
Standard Sizes for Interior French Doors
Interior French doors are almost always 80 inches tall, with width being the variable that changes by room.
| Width | Height | Common Use |
|---|---|---|
| 24" | 80" | Closets, narrow passages |
| 28" | 80" | Powder rooms, pantries |
| 30" | 80" | Bedrooms, home offices |
| 32" | 80" | Main rooms, accessible openings |
| 36" | 80" | Primary suites, larger living areas |
The 32-inch width shows up often because it matches the minimum clear-opening width referenced in federal accessibility guidelines for doorways, which call for at least 32 inches of clear passage when a door is open 90 degrees.
Double Door Configurations
| Configuration | Total Width | Typical Use |
|---|---|---|
| Two 24" doors | 48" | Older homes with standard builder openings |
| Two 30" doors | 60" | Bedrooms, dining rooms |
| Two 36" doors | 72" | Great rooms, primary suites |
The 48-inch double configuration is especially common in Conyers homes built before the 1990s, since it matches the standard 4-foot rough openings many builders used at the time. If your home falls into that era, there's a good chance the existing framing is already a near-perfect fit.
Room-by-Room Picks
Primary bedrooms: A single 36-inch door or a 60-inch double configuration creates a more deliberate entrance without feeling cramped.
Home offices: Frosted or reeded glass in a 32-inch door balances sound control with borrowed light, which matters more in a home office than in most other rooms.
Dining and living areas: Double doors in the 60 to 72-inch range create an open, entertaining-friendly flow between spaces.
French Doors vs. Sliding Doors for Interior Openings
This is one of the most common questions homeowners ask before committing to French doors, and it's rarely answered in generic cost guides.
| Feature | Interior French Doors | Interior Sliding or Barn Doors |
|---|---|---|
| Floor space needed | 30–36" swing clearance per panel | None, slides along the wall |
| Natural light | Good, divided by mullions | Better, single larger pane |
| Sound control | Fair to good with solid-core doors | Poor, gaps along the track |
| Best for | Formal rooms, offices, dining areas | Tight spaces, closets, laundry rooms |
If floor space is tight, especially in front of a doorway where furniture or a hallway limits swing room, a sliding option may actually serve the space better than French doors, regardless of how the room looks in photos.
Georgia Humidity and Why Material Choice Still Matters Indoors
Most cost guides frame interior French doors as immune to the weather concerns that affect exterior doors, and that's mostly true. But it's not the whole story in a climate like Conyers'.
Georgia sits in a humid subtropical zone, and indoor relative humidity in Atlanta-area homes regularly swings well outside the range building scientists consider ideal. The EPA recommends keeping indoor relative humidity between 30% and 50% to limit mold and moisture-related damage, but homes near bathrooms, laundry rooms, or kitchens routinely run higher than that, especially in summer.
Solid wood interior doors placed near those high-moisture rooms can still swell, stick, or develop finish problems over a few humid summers, even though they never face rain. If you're installing French doors near a bathroom, laundry room, or kitchen opening, an engineered wood, vinyl, or composite door is a safer long-term bet than solid hardwood.
Do Interior French Doors Add Resale Value?
There's no universal dollar figure for this, and any guide claiming otherwise is guessing. What's consistent is that opening a dark or closed-off room with glass-paned doors tends to make smaller homes show better to buyers, since it adds perceived light and flow without removing a wall entirely. Think of it as a presentation upgrade more than a guaranteed return.
DIY vs. Professional Installation
DIY works when:
- The existing rough opening is square, level, and already correctly sized
- You're doing a like-for-like swap with no framing changes
- The door is prehung, not a slab requiring custom hanging
Call a professional when:
- The project involves a new opening or a load-bearing wall
- You're unsure whether the glass meets safety glazing requirements
- The opening needs to meet accessibility clearance standards
Finding a Trusted Interior Door Installer in Conyers & Rockdale County
Pricing and sizing only get you so far without someone local who can measure the actual opening and flag problems before they become change orders. Homeowners across Conyers, GA and the wider Conyers & Surrounding Areas region often bundle an interior door upgrade with other home improvement projects, since a contractor already on-site for framing or carpentry work can usually install a French door pair for less than a standalone trip.
If you're weighing doors alongside a broader window or glass upgrade, our guide to window manufacturers serving Conyers and the surrounding areas covers brands and glazing options worth comparing before you buy.
We work throughout Rockdale County and the broader East Metro Atlanta region, and we're happy to take a look at your opening, measure it correctly, and give you a straight answer on whether it's a simple swap or a bigger project. Get a free estimate before you buy a door that doesn't fit.
Meet Your Local Installer
This guide was reviewed by the installation team at Georgia Screen Rooms, who handle door, window, and outdoor living upgrades across Rockdale, Newton, Walton, and Gwinnett counties. Our crews measure openings in person rather than quoting off a phone call, which is why the ranges above reflect what Conyers-area homes actually cost to retrofit, not just national averages. Questions about your specific opening? Contact us and we'll walk through it with you.
FAQ
How much does it cost to install interior French doors in Conyers, GA?
Most interior French door installations run $600 to $3,000, including the door and labor. Basic prehung sets can come in as low as $300 to $600, while custom sizing or premium materials can push a project past $3,000.
What is the standard size for an interior French door?
Standard interior French doors are 80 inches tall, with widths from 24 to 36 inches for a single door. Double-door configurations commonly total 48, 60, or 72 inches wide.
Is DIY installation realistic for interior French doors?
Yes, if the existing rough opening is square, level, and already the right size for a prehung unit. Projects that involve a new opening, framing changes, or a load-bearing wall should go to a professional.
How much clearance do interior French doors need to swing open?
Plan on 30 to 36 inches of clear floor space per panel for an inward-swinging pair. Keep furniture and rugs out of that arc when you're planning the room layout.
Should I choose French doors or sliding doors for a tight interior space?
If floor space in front of the opening is limited, a sliding or barn-style door is usually the better fit since it needs no swing clearance. French doors make more sense in rooms with open floor space on both sides of the opening.
What glass should I choose for privacy in an interior French door?
Frosted, reeded, or textured glass panels are the most common choice for rooms like home offices or bathrooms where you want light without a clear view through. Whatever glass you choose, confirm it meets safety glazing requirements for use near a doorway.
Do interior French doors need to meet accessibility standards?
Only if the opening is part of an accessible route in the home. In that case, a 32-inch door is the minimum width that meets federal clear-width guidance for doorways.
